Make: Hart  |  Model: TM100

Metal Frame Panel Filters

Home > Air Filtration> Metal Frame Panel Filters> Flat Panel Filters

Flat Panel Filters

Maintainance :

The filter panel is readily removed from the filter holding frame or slide. If the filter media is washable, the filter can then be cleaned by rinsing the filter with cold water from a medium pressure hose, back through the clean air side of the media. Allow the filter media to fully dry before re-installing.

Filter Specification :

Air filters shall be Hart TM100 25mm Panel type filters. Filter media is mounted in galvanised frame with mesh on both sides.

  • Face velocity: 1.8m/s
  • Efficiency No.2 dust: 90%
  • Clean resistance: 45Pa
  • Dust holding capacity: 1668g/sqm

Construction :

Filters are manufactured to suit your requirements. The frames can be easily made from Galvanised, Aluminium or Stainless Steel, with wire mesh on one or both sides to provide support to the filter media.

Product Specification :

  • For applications where low pressure drop is required
  • Standard and non-standard sizes available - made to order
  • Galvanised, Aluminium and Stainless Steel frames
  • Filter media is easily replaced

Filter Media

SW HART & Co Flat Panel Filters are available with standard medium grade washable type media. Higher efficiency filter media is also available on request. No oiling agents are required.


Generally used in small air conditioning and ventilation systems requiring low cost, low resistance filters. Filters are usually fitted into slides in ducts or behind fresh air louvers or return air grilles.

19 Garnet Way, Maddington, 6109 Western Australia